ASG - Joint Compound (SKK MARKETING)
We are established in 2010 and based in Bagan Lallang, Butterworth, Penang. ASG products especially ASG Joint Compounds-Specially formulated for quality finishing of drywall joints. ASG-Joint Compounds is a ready-mixed/Non Asbestos vinyl compound used for embedding Joint Fibre Tape, for filling and for final touch-up coats in interior gypsum panel applications. It is ideal material for covering embedded fasteners, corner beads, and for skim coating gypsum panel surfaces where necessary.
ASG Products
- ASG Joint Compounds (28kgs, 5kgs)
- ASG Cornice Compounds (20kgs)
- ASG Cornice Compounds 2 in 1 (20kgs)
- ASG A-Stopping (20kgs)
ASG Products (others)
- Plaster Boards
- Gypsum Boards
- Metal Furring (8', 12')
- Metal Studs
- Cornices
- Domes
ASG Products
- Plaster Ceiling
- Ceiling
- Interior Dacorators
- Renovation-office & home
- Hardware
ASG Joint Compound
- Fill the joints with compound using 6" wide blade knife. Embed the tape and press in with knife. Remove excess compound. Then apply evenly a thin coat over the tape.For best result, spread smooth with long, parallel strokes. Also, apply compound to cover embedded fasteners.
- Apply second coat, smoothing out 2" beyond first coat and allow to dry (use 8" blade knife of joints)
ASG Stopping Compound
- Fill container with clean water.
- Sprinkle the stopping Compound into the water.
- (Approx. 2 parts of compound to 1 part of water)
- Allow to soak for 1 to 3 minutes before mixing.
- Mix to a smooth creamy workable consistency.
- The mixture is now ready for use.
- Do not over mix otherwise it will accelerate setting of the mixture.
ASG 3in1 Stopping Compound
- Fill container with clean water;
- Sprinkle the 3 in 1 stopping Compound into the water.
- (Approx the 3 parts for compound to 4 part of water)
- Allow to stand for 1 to 2 minutes before mixing with fibreglass roving.
- The mixture is now ready for grouting use.
ASG Cornice compound
- Fill container with clean water;
- Add in the Cornice Compound slowly into the water.
(Approx. 5kg of powder to 3 litres of water) - Allow to soak for 1 to 3 minutes before mixing.
- Mix to a smooth creamy workable consistency.
- The mixture is now ready for use.
- Do not over mix otherwise it will accelerate setting of the mixture.
