Profile

SKK Marketing

ASG - Joint Compound (SKK MARKETING)

     We are established in 2010 and based in Bagan Lallang, Butterworth, Penang.  ASG products especially ASG Joint Compounds-Specially formulated for quality finishing of drywall joints. ASG-Joint Compounds is a ready-mixed/Non Asbestos vinyl compound used for embedding Joint Fibre Tape, for filling and for final touch-up coats in interior gypsum panel applications. It is ideal material for covering embedded fasteners, corner beads, and for skim coating gypsum panel surfaces where necessary.

ASG Products

  • ASG Joint Compounds                   (28kgs, 5kgs)
  • ASG Cornice Compounds               (20kgs)
  • ASG Cornice Compounds 2 in 1      (20kgs)
  • ASG A-Stopping                            (20kgs)
8671DF76 77CA 11E1 833E 12314000960A

ASG Products (others)

  • Plaster Boards
  • Gypsum Boards
  • Metal Furring (8', 12')
  • Metal Studs 
  • Cornices
  • Domes
91F70AB6 8200 11E1 8273 12314000960A

ASG Products

  • Plaster Ceiling
  • Ceiling 
  • Interior Dacorators 
  • Renovation-office & home 
  • Hardware
C7565D74 8200 11E1 9AA1 12314000F07E

ASG Joint Compound

  • Fill the joints with compound using 6" wide blade knife. Embed the tape and press in with knife. Remove excess compound. Then apply evenly a thin coat over the tape.For best result, spread smooth with long, parallel strokes. Also, apply compound to cover embedded fasteners.
  • Apply second coat, smoothing out 2" beyond first coat and allow to dry (use 8" blade knife of joints)
ASG Joint Compound

ASG Stopping Compound

  •  Fill container with clean water.
  •  Sprinkle the stopping Compound into the water.
  • (Approx. 2 parts of compound to 1 part of water)
  •  Allow to soak for 1 to 3 minutes before mixing.
  •  Mix to a smooth creamy workable consistency.
  •  The mixture is now ready for use.
  •  Do not over mix otherwise it will accelerate setting of the mixture.
ASG Stopping Compound

ASG 3in1 Stopping Compound

  •  Fill container with clean water;
  •  Sprinkle the 3 in 1 stopping Compound into the water.
  • (Approx the 3 parts for compound to 4 part of water)
  •  Allow to stand for 1 to 2 minutes before mixing with fibreglass roving.
  •  The mixture is now ready for grouting use.
ASG 3in1 Stopping Compound

ASG Cornice compound

  • Fill container with clean water; 
  • Add in the Cornice Compound slowly into the water. 
    (Approx. 5kg of powder to 3 litres of water)
  • Allow to soak for 1 to 3 minutes before mixing. 
  • Mix to a smooth creamy workable consistency. 
  • The mixture is now ready for use. 
  • Do not over mix otherwise it will accelerate setting of the mixture. 
ASG Cornice compound